Palmer Metals Palmer Metals
 Home  |  About Us  |  Contact Us  |  Help  |  Links  |  Testimonials  

Password
Advanced   Click to Search
Products  
Sheet  
Sheet
Wire  
Wire
Tube  
Tube
Sterling Silver Findings  
Sterling Silver Findings
Carat Gold Findings  
Carat Gold Findings
Gold Filled Findings  
Gold Filled Findings
Copper Findings  
Copper Findings
Loose Chain  
Loose Chain
Chain Ready to Wear  
Chain Ready to Wear
Solder and Flux  
Solder and Flux
Casting Grain  
Casting Grain
Tools  
Tools
Stringing Materials  
Stringing Materials
Chemicals  
Chemicals
Special Offers  
Information  
Delivery  
Sheet
Returns  
Wire
Catalogue  
Sterling Silver Findings
Newsletters  
Sheet
Technical Help  
Customer Login  
Username  
Username
  
Username
Password  
Password
  
Password
Login  
Username
Forgotten Password?  
Password
Quick Find Products  
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Safebuy Approved - Please click to Verify

Tools

Home > Tools > Soldering Equipment
Tools
   Now Viewing: Page 1 of 1
 

6 x 6 inch Soldering Board 6 x 6 inch Soldering Board

6 x 6 x 0.5 inch (150 x 150 x 12.5mm) Soldering Board. This non asbestos board is made from Silquar which retains the heat during soldering and can easily be cleaned with water. Takes heat upto 1200 degrees C (2200 F). Comes complete with 4 feet to keep it off the bench.
Code: T-SB66

Exc VAT: £8.00
Inc VAT: £9.40

Quantity (Each):
Total: £ 0.00


Burn Away Brush Burn Away Brush

Burn Away Brush. These brushes are ideal for applying flux while soldering because the bristles of the brush are fire resistant. They can also be used to apply paint, laquer or other materials as the bristles are fine and soft. The brush is 19cm long and approx 2.3mm diameter. Directions for use: Hold the tip of the brush over an open flame and allow the covering to burn back until the bristles are exposed.Take a paper towel or cloth and clean bristles thoroughly. When bristles need to be replaced, simply trim them back and burn off the covering until more bristles are exposed.
Code: T-BABRSHS

Exc VAT: £1.90
Inc VAT: £2.23

Quantity (Each):
Total: £ 0.00


Mini Soldering Torch Mini Soldering Torch

Mini Soldering Torch. Ideal for small soldering jobs on Sterling Silver and Carat Gold. The torch runs on butane gas (lighter fuel) but is supplied empty. The piezo electric ignition system gives instant lighting. The flame is adjustable in length from 12mm to 32mm, the maximum temperature is about 1300 degrees C. Once refuelled the working time is about 90 mins. Comes complete with a base for when not in use.
Code: T-MSTOR

Exc VAT: £19.95
Inc VAT: £23.44

Quantity (Each):
Total: £ 0.00

   Now Viewing: Page 1 of 1
 
Printer friendly version
Palmer Metals Palmer Metals